The Termal Grizzly Conductonaut liquid metal thermal compound is designed for applications that require very high efficiency. Conductonaut is recommended for experienced users who are looking for a top performance product with best heat dissipation where temperature ranges are above 8 °C.
- Thermal Conductivity: 73 W/mk
- Consistency: Liquid
- Viscosity: 0,0021 Pas
- Density: 6,24g/cm3
- Recommended Temperature: 10 °C / +140 °C
Thermal Grizzly Conductonaut is a liquid metal thermal compound based on a eutectic alloy. Our special mixture of metals like tin, gallium and indium, Conductonaut excels with a very high thermal conductivity. We recommend to apply Conductonaut on nickel plated surfaces since this will provide the best long term stability in performance.
It can work with almost any system either with air or with liquid nitrogen (down to -50 °C). Thermal Grizzly Conductonaut is recommended for applications that require extremely high thermal conductivity at room temperature - e.g. between a silicon chip PC microprocessor and heat sink. The liquid metal compound compensates even the slightest irregularities, which can not be achieved with convenstional thermal greases.
Conductonaut thermal grease must not be used with aluminum heatsinks! Conductonaut is a liquid metal compound and can leave visual residues. For best long term performance results we recommend to use coolers with nickel plated surface.
| 2 special needle attachments to to always get exactly the right amount of Conductonaut liquid metal compund. |
| 2 applicators and 2 cleaning pads perfect for applying and touching up or removing the liquid metal thermal paste. |
An airtight sealable and reusable package to prevent drying out.
The package also contains instructions on how to apply the thermal grease correctly.
Check if it is original: Enter the code on the website and be sure that the thermal grease is an original.