M.2 M-key To M.2 WiFi key E SSD Riser Card Adapter M2 key M To Mini-pcie mPCIe PCIe 4.0x1 Wireless Network Card Extension Cable(R45SF)(25cm)

M. 2 M-key To M. 2 WiFi key E SSD Riser Card Adapter M2 key M To Mini-pcie mPCIe PCIe 4.0 x1 Wireless Network Card Extension Cable
Product model: R46SF 4.0 (180 degree connector) /R45SF 4.0 (180 degree connector) /R45SL 4.0 (90 degree connector)
product name:
R46SF--M. 2 key M to mini-pcie cable
R45SF 4.0; R45SL 4.0 ---M. 2 key M to M. 2 key E cable
Wire length: 3-100cm
Speed bandwidth: PCIe 3.0 / 4.0 x1
Product Features:
R46SF--Connect to the M. 2 NVMe key M hard disk interface of the motherboard through the mini-pcie wireless network card extension cable.
R45SF 4.0; R45SL 4.0 ---Connect to the M. 2 NVMe key M hard disk interface of the motherboard through the M. 2 WiFi key E wireless network card extension cable.
Length description: The length of the wire refers to the part of the wire, excluding the PCB and the connector.
Product advantages:

1. Cable advantage, using high-speed cables, supports PCIe 3.0 full-speed stable transmission.

2. The cable length advantage can be customized from 3 cm to 1 meter. The cable impedance of this patch cord is low, and the cable length within 60 cm supports PCIe 4.0 full speed.

3. The differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable.

4. The product is made of high-quality materials, the PCB is made of precision, the thickness of the copper material is thickened to 1oz, the gold plated content of the gold finger is sufficient, and the gold plated foot has good electrical conductivity, which can reduce the blue screen of crash caused by the increase of oxidation and rust resistance. Stable at full speed, no speed reduction required, and no compatibility issues.

5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm at the metal welding point, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem. The wire can be bent or folded without affecting the use.

6. The PCB is designed with short and fattening, which will not get stuck on the graphics card. The fattening and long design makes the board easier to install and reduces the chance of damage.