R54SF M.2 WiFi A.E Key To M.2 for NVME M Key SSD Riser Card PCIE 4.0 x1 Gen4 Full Speed M2 Key A+E to M2 Key-M Ribbon Cable(R54SF)(15cm)

M. 2 WiFi A. E Key To M. 2 for NVME M Key SSD Riser Card PCIE 4.0 x1 Gen4 Full Speed M2 Key A+E To M2 Key-M Riser Ribbon Cable
Product model: R54SF 4.0
Product name: M. 2 key A. E to M. 2 Key M signal cable
Wire length: 3-100cm
Speed bandwidth: PCIe 4.0 x1 gen4 8G/bps
Product function: for NVMEM. 2 SSD is connected to the M. 2 WiFi interface of the motherboard through an extension cable
Length description: The length of the wire refers to the part of the wire, excluding the PCB and the connector. Refer to the figure below for line length dimensioning.
Precautions for purchase:

1. Be sure to recognize the direction when plugging in, and don't plug it in reverse or offset position to prevent the equipment from being burned. When plugging in, hold the socket of the device before plugging in, avoid breaking the socket pins with excessive force. It is forbidden to bend or pull within 2cm of the welding place between the two ends of the wire and the circuit board.

2. Because various motherboards and equipment signal drive capabilities are different, the test results of our store are not guaranteed to be consistent with your test results. As long as the extension cable is connected, the signal will be lost. If you require perfection, please do not buy.

3. The graphics card or motherboard is an electronic device that will age and oxidize over time. Connecting an extension cord will only make it more unstable. So our product does not support old equipment. If your equipment is more than three years old, please do not buy it.

4. It is limited to the product engineer's designated purchase, which is only for product testing. For other purposes, please do not purchase.