BEST SELLERS

In Water / Liquid Cooling

I wanted a dark build and this fit right in. Does everything it's supposed to, nice cpu cooler.

If you are looking for the best performance at quiet noise levels, then this is the unit for you. With a 7800x3d it will run 30's degrees Celsius at idle in the silent preset mode. With CPU demanding tasks it will run low 80's Celsius while in quiet mode. It was extremely easy to install with AMD or Intel CPU's. The RGB looks great and can easily be controlled from the MSI Center software. When you install the unit and then run windows update the MSI Center software download will automatically run.

Easy to install Keeps cpu at about 39 degrees idle and haven't seen it get above 50 while playing Monster Hunter Wilds.

Quick and easy to install with good and simple instructions. Took me approximately 20 minutes to remove an existing AIO and install this AIO. The 2K screen is BEAUTIFUL with its AMOLED screen. The fans are quiet and have rubber corners to minimize rattle noise. The KANALI software to control the screen is user-friendly and works well. Thought and time was spent on the application unlike other barebone controllers. You can do a 2:1 screen or two 1:1 screens on the 2K display. Displayable Date & Time, Motherboard temperature, and CPU/GPU/Memory temperature, frequency, usage, voltage, , Branding is not over the top! I can appreciate that there logo is not blaring in my build and taking attention away from the display.

Easy to install LEDs aren't too bright Removable MSI faceplate Keeps my 9800x3D cool

Amazing AIO. Fans already preinstalled. Easy instructions to follow. Cools my CPU no issue

Excellent RGB compatibility Simple cable management

these bad babies where easy to set up and install keeps my pc very cool and argb works really good

- Awesome RGB - Easy to Install - No issues for over 2 years

I have both the nautilus 240 rs and 360 rs, both have worked amazing right out of the box with zero issues and cools great. Although i do recommend use a commander core xt (if you can buy one) it makes controlling the fan speeds and RGB a lot easier. But besides that i highly recommend because theyre not too expensive and the fans that come with, they push and pull a great amount of air. Perfect for someone looking to do a white build or to upgrade their AIO.

- Easy to setup ARGB with headers on the motherboard. No need for icue hubs or anything like that. - High performance fans with minimal noise unless they are under full load. Gets a bit noisy at 100% but have only experienced that during synthetic benchmarking. - Keeps my 9800x3d around 37C at idle, under 60C while gaming. CPU is not overclocked, but jumps up to 5.3Ghz at times with normal performance boosting. - Love the looks!

Easy Installation and set up

The TRYX 360 MM Panorama SE AIO is a great choice for a custom computer build. The overall build quality is very good, better than the first version, and the pump and heat block unit seems much more robust and is much smaller. The screen is not too noticeably different than the first version but is on a different bracket and allows for a vertical mode. It comes with all the necessary hardware, the unboxing is once again a treat, and all the documentation is easy to understand. On top of it being another great addition to the lineup of one of the most unique coolers on the market, there are other pros: The ARGB and non-led versions of the fans are very sturdy and well-built. They look great as well. The screen is easy to install and magnetically clicks onto the pump base, and uses forks. It has a very high resolution and is crisp and easy to understand. It is also built off of Android, as I recognized after it rebooted for a firmware update. All the cables are of high quality and the tubes are inside braided covers that look professional. They are also long enough for the big cases needed for a large cooler like this, and bend easily, and you can rotate the pump block now to fit your case, as the old one was one way only. The software for the cooler is easy to use and provides a way to upload custom backgrounds from screen capture, preferably a 1440p MP4 video, similar to animated desktop backgrounds. The inbuilt library is small but has some excellent animated backgrounds for the cooler. There is an option to show many settings, including Temp and % Usage for GPU, CPU, and RAM, as well as other voltages and temps, and date and time. You can also show the GPU and CPU model, and orient these settings on the left, middle, or right of the screen. The new SE model features waterfall mode, and a METAL mounting bracket rather than a plastic one in the first edition. It also allows for a rotatable pump base. The new SE unit is built better, and doesn't have a fan anymore.

Ease of set up Performance is good Quiet pump Screen is great and easy to use No custom software needed, so VERY easy to set up.

Great price

It works with ARGB app with MSI, easy setup.

Installation was easy and it worked on the first try

Slim profile Cable management is easy and well thought of! Nice packaging Easy installation

-Looks great -Quiet enough -Keeps my cpu cool

Bright LCD, quiet