
No driver needed in Windows

Maybe a Necessity if You Have a USB-C on Front Panel Header because no USB 3.2 GEN1 connector on motherboard. The PCI-E 1X to USB 3.2 GEN1 5Gbps 20pin Front Panel Header allows you to connect the USB-C front panel header to your PCI-E 1X slot

plug and play, came with everything you need, no drivers


-Fits well in my tiny prebuild mini atx case. -no cable needed for power from the psu

![M.2 to SATA Adapter [6-Port], RIITOP M2 NVMe to SATA 3.0 Card with ASM1166 Chipset for SSD/HDD up to 6Gbps, Come with Heatsink M.2 to SATA Adapter [6-Port], RIITOP M2 NVMe to SATA 3.0 Card with ASM1166 Chipset for SSD/HDD up to 6Gbps, Come with Heatsink](https://c1.neweggimages.com/productimage/nb300/ARE9S2509150HK24B8F.jpg)

Gives me extra 4 USB ports. Windows 8 recognized it with no issues.


Freenas server unit w Mini ITX MB needed a single board w at least 9 ports for HDDs. This was the only one I found w 10 ports Had no problems w compatibility and worked out of the box Included SATA and extra power cables TROPRO provided tracking info as needed





I have two of these in a Threadripper PC. In an X16 socket 4 M.2 drives. In an X8 socket 2 M.2 drives. All six drives run off cpu lanes at max speed for the M.2 drive. FLAWLESS with Sabrent GEN4 drives for months. No temp throttling.




Even on an older motherboard it was still detected.
