192KHz HDMI ARC Extractor HDMI ARC Audio Support ARC TV to Toslink + Coaxial + Analog 3.5mm Stereo Audio Return Channel Adapter
- [HDMI ARC Audio Extract] HDMI ARC Adapter to digital and analog signals. Use the HDMI cable to connect the TV HDMI ARC port to the ARC audio converter, and then connect optical/coaxial or 3.5mm to to soundbar, speaker, home theater, A/V receiver, etc. Note: 3.5 Jack only supports only PCM/LPCM audio. TV must have an ARC port, otherwise it cannot be used.
- [192KHz Sampling Rate] HDMI audio extractor Supports 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz sampling rates. Note: CEC is not supported, When you open ARC, TV remote control can not control the volume, you can only adjust the speaker/speaker/home theater volume.
- [2.0CH/5.1CH Audio Converter] When switching to HDMI ARC mode, Plug it and play after power -on, not more operation, convenient and fast. Note: Optical and coaxial support 5.1CH and backward compatible 2.0CH, 3.5mm headphone port supports up to 2.0CH.
- [High-quality Audio Converter] Aluminum alloy ARC audio converter has good heat dissipation and durability. It uses high -end chips to reduce digital noise technology, signal gain technology, dual signal processing, and clear sound quality. Support multi-channel simultaneous audio output, sound synchronization without delay.
- [Wide Compatibility] Easy installation and operation, perfect match. Compatible with all TVs and audio devices with HDMI ARC ports. Supports Dobly@5.1, DTS@5.1, Dobly AC3,DSD,PCM,LPCM. NOTE: It will not work with Dobly atmos/Dobly Digital Plus etc.
Optical and Coaxial interface supports 5.1 channel transmission
5.1CH Mode: Set 5.1CH to get 5.1 digital surround. Which can be extracted via Optical SPDIF and Coaxial output. Supports Dobly, DTS, Dobly AC3,DSD,PCM,LPCM. (NOTE: It will not work with Dobly atmos/Dobly Digital Plus etc.)
ARC Audio Extractor
This HDMI ARC Audio Extractor can output TV's sound to digital optical/coaxial and analog 3.5mm headphone jack (can output sound at the same time) through HDMI ARC interface, perfect audio adapter.
Specificaitions:
- Support SPDIF output
- Support Coaxial output
- Support 3.5mm stereo headphone output
- Support switch noise reduction
- Support automatic signal mute function
- Support transmission of 192KHz audio sampling rate
Features
- 3.5mm stereo headphone port equipped with high-performance audio amplifier
- Optical fiber coaxial interface supports 5.1 channel transmission
Three Audio mode settings:
- 5.1CH Mode: Set 5.1CH to get 5.1 digital surround.(HDMI input source must support 5.1CH), Optical fiber coaxial interface supports 5.1 channel transmission.
- 2CH Mode: Set 2CH for analog stereo audio. Extracts the digital 2CH PCM stereo audio signal from the ARC HDMI input while converting it to 2CH analog stereo output via its analog 3.5mm/optical SPDIF/coaxial output.
- PASS Mode: The output audio format depends on the ARC TV input signal.
ARC HDMI Audio Extractor Converter
Note:
3.5 Jack only supports only PCM/LPCM audio.
3.5 mm headphone port up to 2.0 CH.
Aluminum metal shell
ARC Audio Extractor adopts aluminum alloy shell, which can effectively dissipate heat, Long service life and durability
TV with ARC HDMI Port
ARC Audio Extractor only supports TVs with ARC HDMI ports.
